Family Owned & Operated Since 1978
Menu
Marlin Plumbing Heating and Air team with service vans in St. George Utah
St. George, UT

AC Installation in St. George, UT

Right-sized, high-efficiency AC systems installed by Southern Utah's most experienced HVAC team. Marlin Plumbing Heating & Air has been keeping St. George homes cool since 1978 — we know exactly what it takes to handle 110°F summers.

4.9★ GoogleSince 1978Licensed & Insured

Request Service

We'll confirm scheduling availability.

No spam. Licensed & insured. Free estimates, always.

48+

Years

Serving Southern Utah

IAPMO

Certified

Verified Credential

4.9

Star Rating

Live Count on Google

24/7

Available

Emergency Response

Licensed

& Insured

Utah Home Services

Free

Estimates

No Hidden Fees Ever

New AC Systems Engineered for Southern Utah's Extreme Heat

A properly installed AC system is the single most important investment you'll make in your St. George home's comfort and livability. After installation, protecting that investment with regular AC maintenance is essential — especially given how hard Southern Utah's climate pushes equipment. Our maintenance program is designed to maximize the lifespan of your new system.

If you have a commercial property that needs cooling, our commercial HVAC team handles light commercial installations, rooftop units, and multi-zone systems throughout Washington County. And if you're experiencing an urgent failure while evaluating replacement options, our AC repair team can often provide a same-day bridge repair to keep you cool while we plan your new installation.

What Makes a St. George AC Installation Different

Installing an AC system that will perform reliably through five months of 100°F+ heat is not the same as a standard installation. The equipment selection, sizing calculation, refrigerant line placement, and outdoor unit positioning all have to account for Southern Utah's unique climate demands. An undersized system runs continuously and fails prematurely. An oversized system short-cycles, creates humidity problems, and also fails prematurely. Proper Manual J load calculations — accounting for St. George's intense solar gain, desert air infiltration, and your home's specific construction — are the foundation of an installation that lasts.

We install complete central air conditioning systems, ductless mini-split systems, and heat pump systems. Every installation includes a full load calculation, duct system evaluation (with repairs or upgrades if needed), proper refrigerant charging to manufacturer specs, and a post-installation performance verification. We're licensed, certified, and fully insured — and we pull all required permits so your installation is code-compliant and your homeowner's insurance remains valid.

  • Manual J load calculation on every installation — no guessing on system size
  • All major brands: Carrier, Trane, Lennox, Rheem, Goodman, and more
  • High-efficiency systems up to 20+ SEER2 available
  • Duct inspection and repair included with every installation
  • All permits pulled — fully code-compliant installations
  • Financing available — keep the family cool while you pay over time
Marlin Plumbing Heating & Air installing a new high-efficiency central air conditioning system at a St. George, Utah home

Service Details

Quick Info

Timeline

1–2 days

Warranty

10-year manufacturer + 1-year labor

Know the Warning Signs

Signs You Need AC Installation

Catching these early prevents a small issue from becoming a costly emergency.

System Is 14+ Years Old

In St. George's climate, AC systems age faster than national averages. A 14-year-old system in Southern Utah has logged the equivalent operating hours of an 18-year system in a milder climate. Reliability drops sharply after this point — and the cost of repeated emergency repairs adds up fast.

Repair Estimate Exceeds 50% of Replacement Cost

A common rule in HVAC: if the repair costs more than half what a new system costs, replacement delivers better long-term value. A new system comes with a 10-year manufacturer warranty and dramatically improved efficiency — the math often favors replacement.

Home Never Reaches Set Temperature on Hot Days

If your system runs all day and your Bloomington Hills or Little Valley home still sits at 80°F when the thermostat is set to 74°F on a 110°F day, your system is either undersized for your home's actual load or has lost significant capacity — both point toward replacement.

Electric Bills Are Climbing Year Over Year

Older, less-efficient systems can use 30–40% more electricity than a modern 16+ SEER2 unit. In St. George, where you're running AC for five months straight, that difference adds up to hundreds of dollars per season — often more than the financing payment on a new system.

Refrigerant Is R-22 (Freon)

R-22 refrigerant was phased out federally and is now extremely expensive — often $150+ per pound. If your system still uses R-22 and needs a recharge, you're spending hundreds on a temporary fix for an outdated system. Replacement is the economically sound choice.

Adding New Construction or Home Addition

If you've added square footage, converted a garage, or finished a basement, your existing system may be unable to handle the increased load. A load recalculation often reveals the existing system is now too small — a new or supplemental system is the right solution.

Local Expertise

Installing AC for St. George's Climate: What Most Contractors Miss

Washington County's heat is in a class of its own. When we size an AC system for a St. George home, we're accounting for outdoor design temperatures that exceed 115°F — not the 95°F that national sizing charts assume. A system sized for Phoenix's climate will be undersized for Little Valley or Coral Canyon. We use local design conditions, not generic regional averages, in every Manual J calculation.

Solar heat gain is a major load factor in Southern Utah. Homes with significant south- and west-facing glass can have materially higher afternoon cooling demand than shaded homes of the same size. Proper equipment selection accounts for orientation, glass area, insulation, infiltration, and duct losses through a room-by-room load calculation.

Washington County is one of the fastest-growing areas in the United States, and the pace of new construction here has exposed a persistent problem: many homes are built with minimal attic insulation and ductwork that was never adequate for sustained 110°F+ operation. When we assess a home for AC installation, we evaluate the entire envelope — because a new system in a poorly insulated home will underperform regardless of its efficiency rating. We'll tell you honestly if duct repairs or insulation improvements should accompany your installation.

Marlin Plumbing Heating & Air installing a new high-efficiency central air conditioning system at a St. George, Utah home

Transparent from Start to Finish

How Our Service Works

01

Free In-Home Assessment & Load Calculation

A Marlin technician visits your home, measures your square footage, evaluates insulation levels, window exposure, ceiling heights, duct condition, and sun orientation. We run a proper Manual J calculation — the industry standard for accurate system sizing. In St. George, solar gain on west-facing walls and roof surfaces is a major factor that generic online calculators miss.

02

Equipment Selection & Written Quote

Based on the load calculation and your efficiency and budget goals, we recommend specific equipment with SEER2 ratings, warranty terms, and pricing. We offer options — not a single take-it-or-leave-it quote — and explain the long-term cost differences so you can make an informed decision. Everything is in writing before we schedule.

03

Installation Day

Our installation crew arrives on time, protects your floors and work areas, removes and disposes of your old system, and installs the new equipment to manufacturer specifications. We pull all required permits. Most single-zone central AC replacements are completed in one day. More complex installations (multi-zone, duct modifications, electrical upgrades) may take two days.

04

Commissioning & Walkthrough

We charge the refrigerant to manufacturer specifications (not by feel), verify all electrical connections, confirm proper airflow at every register, test thermostat operation, and run the system through a complete cycle. We walk you through your new equipment, explain the maintenance schedule, and register your manufacturer warranty before we leave.

Compare Your Options

Central AC vs. Ductless Mini-Split: Which Is Right for Your St. George Home?

Both systems can keep you cool in Southern Utah's extreme heat — but they suit different situations. Here's how they compare.

Feature
Central Air Conditioning
Ductless Mini-Split
Best Fit
Whole-home cooling with existing ductwork
Additions, garages, casitas, or homes without ducts
Installed Cost
$4,500–$12,000 for whole-home system
$2,000–$5,000 per zone; multi-zone adds up
Efficiency
Up to 20 SEER2 on premium systems
Up to 25+ SEER2 — often more efficient
Zone Control
Single zone standard; multi-zone requires zoning dampers
Each head unit is independently controlled
Appearance
Invisible — uses existing vents and registers
Wall-mounted head unit visible in each room
Duct Requirement
Requires ductwork — existing or new
No ductwork needed — just a small line set
Maintenance
Annual professional service, filter changes
Clean air filter monthly, annual professional service

Our recommendation: For most St. George homes with existing ductwork, central AC is the most cost-effective whole-home solution. For a room addition, detached garage, casita, or a home without ducts, a ductless mini-split is often the better choice. We can help you evaluate both options for your specific home during a free assessment.

The Marlin Difference

Why Southern Utah Trusts Marlin

We Size Systems Correctly — Every Time

Oversizing is the most common installation mistake in residential HVAC. An oversized system short-cycles — it cools quickly, shuts off, then runs again minutes later — wearing out compressor components and never properly dehumidifying the air. We use Manual J calculations on every installation because guessing costs you money for years.

46 Years of St. George Climate Experience

We've installed systems in neighborhoods from Entrada to Coral Canyon to La Verkin. We account for solar exposure, duct condition, filtration, and the sustained outdoor temperatures Southern Utah equipment must handle. Those local operating conditions directly inform system sizing and installation details.

Full Permit Compliance

We pull all required Washington County permits on every installation. This protects your homeowner's insurance, ensures the installation meets code, and gives you documentation if you ever sell your home. Unpermitted HVAC work creates real problems at closing — we make sure you're protected.

Financing Options Available

A quality AC installation is a significant investment. We offer financing options so you can get a properly sized, high-efficiency system now — without waiting until your old system fails completely on the hottest day of the year. Ask us about current terms and any available utility rebates.

Got Questions?

AC Installation FAQ

Practical answers based on the questions St. George homeowners ask most.

Most residential central AC replacements in St. George fall between $4,500 and $12,000 installed, depending on system size, efficiency rating (SEER2), brand, and whether duct modifications are needed. We provide written, itemized quotes after a proper load calculation — never a ballpark over the phone.

Need AC Installation?

Emergency calls are answered 24/7. Contact us for the current arrival window and a clear estimate before work begins.

Family Owned & Operated • Since 1978 • Licensed & Insured • IAPMO Certified

Call Anytime

(435) 287-4445

24/7 Emergency Available

Call for current availability
Call NowContact Us